Dan Gray Dan Gray's Profile Page

Dan Gray Dan Gray

0 Course Enrolled • 0 Course Completed

Biography

Exam Vce NSE7_PBC-7.2 Free | Latest NSE7_PBC-7.2 Test Cram

The third format is a web-based practice exam that is compatible with Firefox, Microsoft Edge, Safari, and Google Chrome. So the students can access it from any browser and study for Fortinet NSE7_PBC-7.2 Exam clarification. In addition, Mac, iOS, Windows, Linux, and Android support the web-based Fortinet NSE7_PBC-7.2 practice questions.

Fortinet NSE7_PBC-7.2 Certification Exam is intended for professionals who work in public cloud security roles, such as security engineers, cloud security architects, and security operations center (SOC) professionals. NSE7_PBC-7.2 exam is an excellent opportunity for these professionals to demonstrate their expertise in deploying and managing security solutions for public cloud environments. Fortinet NSE 7 - Public Cloud Security 7.2 certification confirms that the individual possesses the required knowledge and skills to secure public cloud environments using Fortinet security solutions.

>> Exam Vce NSE7_PBC-7.2 Free <<

Latest NSE7_PBC-7.2 Test Cram - Valid Dumps NSE7_PBC-7.2 Ppt

DumpsValid is regarded as an acclaimed NSE7_PBC-7.2 dumps study material provider for certification exams that includes a range of helping materials, programs and pathways to ease your tensions of NSE7_PBC-7.2 exam preparation. The prime objective in developing NSE7_PBC-7.2 exam dumps is to provide you the unique opportunity of getting the best information in the possibly lesser content. It not only saves your time but also frees you from the hassle of going through tomes of books and other study material. Shorn of unnecessary burden, you better focus what is extremely important to pass exam; hence you increase your chances of success with NSE7_PBC-7.2 Exam Questions than other that of candidates.

The Fortinet NSE7_PBC-7.2 exam is designed for professionals who have a good understanding of cloud computing and networking concepts. NSE7_PBC-7.2 exam covers various topics related to cloud security, such as cloud computing models, cloud security risks, cloud security frameworks, and cloud security solutions. NSE7_PBC-7.2 Exam also covers Fortinet's cloud security solutions, such as FortiGate Cloud, FortiWeb Cloud, and FortiCWP.

Fortinet NSE 7 - Public Cloud Security 7.2 Sample Questions (Q59-Q64):

NEW QUESTION # 59
Which statement about Transit Gateway (TGW) in Amazon Web Services (AWS) is true?

A. Both the TGW attachment and propagation must be in the same TGW route table
B. A TGW attachment can be associated with multiple TGW route tables.
C. TGW can have multiple TGW route tables.
D. The TGW default route table cannot be disabled.

Answer: C

Explanation:
Explanation
According to the AWS documentation for Transit Gateway, a transit gateway is a network transit hub that connects VPCs and on-premises networks. A transit gateway route table is a set of rules that determines how traffic is routed among the attachments to the transit gateway1.
A transit gateway can have multiple route tables, and you can associate different attachments with different route tables. This allows you to control how traffic is routed between your VPCs and VPNs based on your network design and security requirements1.
The other options are incorrect because:
Both the TGW attachment and propagation must be in the same TGW route table is not true. You can associate an attachment with one route table and enable propagation from another attachment to a different route table. This allows you to separate the routing domains for your attachments1.
A TGW attachment can be associated with multiple TGW route tables is not true. You can only associate an attachment with one route table at a time. However, you can change the association at any time1.
The TGW default route table cannot be disabled is not true. You can disable the default route table by deleting all associations and propagations from it. However, you cannot delete the default route table itself1.
1: Transit Gateways - Amazon Virtual Private Cloud

NEW QUESTION # 60
Refer to the exhibit

You deployed an HA active-passive FortiGate VM in Microsoft Azure.
Which two statements regarding this particular deployment are true? (Choose two.)

A. During the failover, the passive FortiGate issues API calls to Azure
B. There is no SLA for API calls from Microsoft Azure.
C. Use the vdom-excepticn command to synchronize the configuration.
D. By default, the configuration does not synchromze between the primary and secondary devices.

Answer: A,D

Explanation:
* A is correct because in this deployment, the passive FortiGate issues API calls to Azure to update the routing table and the public IP address of the active FortiGate123. This way, the traffic is redirected to the new active FortiGate after a failover.
* B is incorrect because the vdom-exception command is used to exclude specific VDOMs from being synchronized in an HA cluster.This command is not related to this deployment scenario.
* C is incorrect because Microsoft Azure does provide an SLA for API calls. According to the Azure Service Level Agreements, the API Management service has a monthly uptime percentage of at least
99.9% for the standard tier and higher.
* D is correct because by default, the configuration is not synchronized between the primary and secondary devices in this deployment. The administrator needs to manually enable configuration synchronization on both devices123. Alternatively, the administrator can use FortiManager to manage and synchronize the configuration of both devices4.

NEW QUESTION # 61
Refer to the exhibit

Consider the active-active load balance sandwich scenario in Microsoft Azure.
What are two important facts in the active-active load balance sandwich scenario? (Choose two )

A. It supports session synchronization for handling asynchronous traffic.
B. It is recommended to enable NAT on FortiGate policies.
C. It uses the vdom-exception command to exclude the configuration from being synced
D. It uses the FGCP protocol

Answer: A,B

Explanation:
B . It is recommended to enable NAT on FortiGate policies. This is because the Azure load balancer uses a hash-based algorithm to distribute traffic to the FortiGate instances, and it relies on the source and destination IP addresses and ports of the packets1. If NAT is not enabled, the source IP address of the packets will be the same as the load balancer's frontend IP address, which will result in uneven distribution of traffic and possible asymmetric routing issues1. Therefore, it is recommended to enable NAT on the FortiGate policies to preserve the original source IP address of the packets and ensure optimal load balancing and routing1. D. It supports session synchronization for handling asynchronous traffic. This means that the FortiGate instances can synchronize their session tables with each other, so that they can handle traffic that does not follow the same path as the initial packet of a session2. For example, if a TCP SYN packet is sent to FortiGate A, but the TCP SYN-ACK packet is sent to FortiGate B, FortiGate B can forward the packet to FortiGate A by looking up the session table2. This feature allows the FortiGate instances to handle asymmetric traffic that may occur due to the Azure load balancer's hash-based algorithm or other factors.
The other options are incorrect because:
It does not use the vdom-exception command to exclude the configuration from being synced. The vdom-exception command is used to exclude certain configuration settings from being synchronized between FortiGate devices in a cluster or a high availability group3. However, in this scenario, the FortiGate devices are not in a cluster or a high availability group, but they are standalone devices with standalone configuration synchronization enabled. This feature allows them to synchronize most of their configuration settings with each other, except for some settings that identify the FortiGate to the network, such as the hostname.
It does not use the FGCP protocol. FGCP stands for FortiGate Clustering Protocol, which is used to synchronize configuration and state information between FortiGate devices in a cluster or a high availability group. However, in this scenario, the FortiGate devices are not in a cluster or a high availability group, and they use standalone configuration synchronization instead of FGCP.

NEW QUESTION # 62
Refer to the exhibit

The exhibit shows the results of a FortiCNP registry scan
Which two statements are correct? (Choose two )

A. The registry scan is part of the FortiCNP cloud protection.
B. The registry scan is part of the FortiCNP container protection.
C. When adding a repository, you can leave the Tag section blank to scan all images-
D. When adding a repository, you can add a minimum number of images to be imported through the CAP section.

Answer: B,C

Explanation:
The exhibit shows the results of a FortiCNP registry scan, which is part of the FortiCNP container protection. FortiCNP's Container Protection provides deep visibility into the security posture of container registries and images1. The registry scan utilizes Common Vulnerabilities and Exposures (CVE) index regularly updated by NVD to detect underlying vulnerabilities, security flaws, and provides security best practices2. The registry scan is performed at the registry level, and it can scan all images in a repository if the Tag section is left blank when adding a repository2. The CAP section stands for Container Assurance Policy, which defines the minimum number of images to be scanned per repository3. Therefore, the correct statements are A and C. Reference: Container Image Scan | FortiCNP 22.3.a, FortiCNP, Cloud Native Application Protection Platform | FortiCNP

NEW QUESTION # 63
Refer to the exhibit. You are tasked with deploying FortiGate using Terraform. When you run the terraform version command during the Terraform installation, you get an error message.

What could be the reason that you are getting the command not found error?

A. You must assign correct permissions to the ec2-user.
B. You must reinstall Terraform
C. You must move the binary file to the bin directory.
D. You must change the directory location to the root directory

Answer: C

Explanation:
According to the Terraform documentation for installing Terraform on Linux, you need to download a zip archive that contains a single binary file called terraform. You need to unzip the archive and move the binary file to a directory that is included in your system's PATH environment variable, such as /usr/local/bin. This way, you can run the terraform command from any directory without specifying the full path.
If you do not move the binary file to the bin directory, you will get a command not found error when you try to run the terraform version command, as shown in the screenshot. To fix this error, you need to move the binary file to the bin directory or specify the full path of the binary file when running the command.

NEW QUESTION # 64
......

Latest NSE7_PBC-7.2 Test Cram: https://www.dumpsvalid.com/NSE7_PBC-7.2-still-valid-exam.html